alfworld-object-cooler

1# Skill: Cool Held Object
2 
3## Purpose
4Use this skill when you are holding an object (e.g., `pot 1`) that needs to be cooled and you are at the location of a valid cooling receptacle (e.g., `fridge 1`). The skill executes the `cool` action to change the object's state.
5 
6## Prerequisites
71.  **Object in Hand:** You must already be holding the target object (e.g., `pot 1`).
82.  **At Cooling Receptacle:** You must be at the location of the cooling appliance (e.g., `fridge 1`). Use `go to {recep}` to navigate first if needed.
93.  **Valid Receptacle:** The receptacle must be a valid target for the `cool` action (e.g., fridge, freezer). The environment will validate this.
10 
11## Core Action
12Execute the `cool` action with the format: `cool {obj} with {recep}`.
13 
14## Execution Flow
151.  **Verify State:** Confirm you are holding the object and are at the cooling receptacle's location.
162.  **Execute:** Perform the `cool` action.
173.  **Verify Outcome:** The expected observation is "You cool the {obj} using the {recep}." If the observation is "Nothing happened," the action was invalid—check the prerequisites or try a different receptacle.
18 
19## Example from Trajectory
20*   **State:** Holding `pot 1`, at `fridge 1`.
21*   **Action:** `cool pot 1 with fridge 1`
22*   **Result:** Observation: "You cool the pot 1 using the fridge 1."
23 
24## Next Steps
25After successful cooling, the object is ready for the next task step (e.g., `put {obj} in/on {recep}`).