alfworld-object-storer

1# Skill: Object Storer
2 
3## When to Use
4Trigger this skill when:
51. The agent is holding the target object (optionally cleaned/heated/cooled as required)
62. A suitable storage receptacle has been identified
73. The agent needs to execute the final placement step
8 
9## Core Workflow
10 
11### 1. Validate Prerequisites
12- Confirm the agent is holding `{object_name}` (check inventory)
13- Confirm the agent is at the location of `{target_receptacle}`
14- If not at the receptacle, navigate there first: `go to {target_receptacle}`
15 
16### 2. Check Receptacle State
17Evaluate the receptacle before placing:
18 
19| Receptacle State | Action |
20|-----------------|--------|
21| Open and empty/suitable | Proceed with `put` |
22| Closed (drawer, cabinet, safe) | `open {target_receptacle}` first, then `put` |
23| Unsuitable (wrong type, full) | Abort and search for alternative receptacle |
24 
25### 3. Execute Storage
26- Run: `put {object_name} in/on {target_receptacle}`
27- Check the observation for confirmation
28 
29### 4. Verify Placement
30- A successful placement updates the receptacle contents in the observation
31- If the observation confirms the object is now in/on the receptacle, storage is complete
32 
33## Example
34 
35**Task:** "Clean the knife and put it in a drawer."
36 
37```
38> go to drawer 1
39The drawer 1 is closed.
40> open drawer 1
41You open the drawer 1. The drawer 1 is open. In it, you see nothing.
42> put knife 1 in/on drawer 1
43You put the knife 1 in/on the drawer 1.
44```
45…