alfworld-tool-locator

1# Instructions
2 
3Locate a specified tool or device by systematically checking receptacles where it is likely stored.
4 
5## Workflow
61. **Prioritize search locations** based on tool type:
7   - Small tools/electronics (desklamp, remotecontrol): `sidetable`, `desk`, `drawer`, `shelf`
8   - Kitchen tools (knife, spatula): `countertop`, `cabinet`, `drawer`
9   - Cleaning tools (sponge, spraybottle): `shelf`, `cabinet`, `countertop`
10   - Default: check all visible receptacles in order
112. **Navigate** to each prioritized receptacle: `go to {receptacle}`
123. **Inspect** the observation for the target tool name
134. **If found:** Stop searching. Proceed to use the tool for the main task
145. **If not found:** Continue to the next receptacle in the priority list
156. **If exhausted:** Expand search to remaining receptacles not yet checked
16 
17## Action Format
18- `go to {receptacle}` -- navigate to check a location
19- `take {tool} from {receptacle}` -- pick up the tool once found (if needed)
20- `use {tool}` / `toggle {tool}` -- operate the tool in place (e.g., desklamp)
21 
22## Error Recovery
23- If "Nothing happened": verify the receptacle name matches the environment scan
24- If tool not found after all likely spots: expand search to every receptacle from the initial environment scan
25 
26## Example
27 
28**Scenario:** You need to find a desklamp to examine an object.
29 
30```
31Thought: I need to find a desklamp. Desklamps are usually on sidetables or desks.
32Action: go to sidetable 1
33…